Solar Panels
Aiko Solar Panels Repairs Perth
Independent Perth maintenance, testing and replacement services for AIKO All Back Contact solar panels.
- Electrical Licence EC8323
- CEC Approved Solar Retailer
- Accredited Installer SW7097859
- Fully Insured
- 5-Year Workmanship Warranty
- Established 1997
Overview
AIKO Solar Panel Repair & Servicing Perth
AIKO panels feature unique cell architecture designed for high efficiency and a uniform appearance. While they are built to resist common degradation issues, the harsh Perth climate can still impact rooftop systems over time. We provide independent testing, maintenance and repair advice for homeowners living with AIKO solar arrays.
Servicing AIKO ABC Panels in Perth
AIKO uses All Back Contact (ABC) technology, which moves the electrical connections to the rear of the cell. This removes grid lines from the front of their Gen 3 Neostar panels, allowing up to 24.5% module efficiency. While this design is highly efficient, any physical damage to the panel still requires careful inspection. We test both the 490W Neostar 3S and 510W Neostar 3S models to ensure they are performing as expected. If your system output drops unexpectedly, we can isolate the fault to determine if an individual panel has failed or if the issue lies in the wiring, isolators or inverter.
- Testing for the 490W and 510W Neostar 3S All Black panels
- Isolating faults in All Back Contact (ABC) strings
- Checking rear electrical connections and rooftop wiring
How the Perth Environment Affects Your Panels
Perth subjects rooftop solar arrays to intense summer heat, high UV levels, and coastal salt build up. AIKO builds their N-Type panels to be less susceptible to Light-Induced Degradation (LID) and Potential-Induced Degradation (PID). However, the surrounding components of your solar system are still vulnerable. Extreme heat can accelerate the aging of DC isolators and wiring insulation. Coastal salt and dust accumulation can also reduce sunlight absorption. Although AIKO panels are tested to generate roughly 30% more power than standard technology when a single cell is shaded, keeping the glass clean from heavy grime is still necessary for optimal performance.
Warning Signs of Solar System Faults
Your AIKO panels are designed with a clean, uniform all-black finish without silver busbars. Because of this dark aesthetic, physical damage like microcracks, snail trails, or delamination might be harder to spot from the ground. The most obvious sign of a problem is a sudden drop in your daily energy production, which you can usually monitor through your inverter app. You might also notice inverter fault lights or physical debris on the roof after a severe storm. If you suspect your panels have been damaged by hail or debris, a professional visual and electrical inspection is the safest way to assess the system.
Repair Versus Replacement
AIKO provides a 30-year linear performance warranty on their panels, meaning premature failure is rare. When a system stops working, the fault is usually found in the inverter, the DC isolators, or the rooftop cabling rather than the panels themselves. We always aim to repair these balance of system components to get your solar working again safely. If a specific AIKO panel has suffered severe physical damage, it cannot be repaired and must be replaced. We can help source a compatible panel that matches the voltage and current profile of your existing string, ensuring the rest of your system continues to operate efficiently.
FAQs
Common questions
Why is my AIKO solar system producing less power than usual?
A drop in power can be caused by dirt accumulation, shading from new tree growth, or an inverter fault. While AIKO panels have strong partial shade performance, severe dirt or shading will still limit output. We can test the system to see if the issue is a failed component or just a need for panel cleaning.
Can a damaged AIKO panel be repaired?
No, if the glass is shattered or the internal cells of an AIKO Neostar panel are physically damaged, the panel itself cannot be repaired. It must be replaced to prevent water ingress and electrical safety risks. We can isolate the damaged panel and install a suitable replacement.
Does washing my all-black panels improve efficiency?
Yes. Perth experiences long dry spells where dust and coastal salt build up on solar panels. While AIKO panels achieve up to 24.5% efficiency under ideal conditions, a thick layer of grime blocks sunlight and reduces this efficiency. A professional clean can restore your system to its maximum potential.
How do I know if my panel fault is covered by warranty?
AIKO panels come with a 30-year linear performance warranty. If a panel fails due to a manufacturing defect, it is usually covered. However, damage from hail, falling branches, or improper installation is generally not covered by the manufacturer. We can provide an independent assessment to help with your warranty or insurance claim.
Reviews
What Perth customers say
Need this looked at?
Tell us what the system is doing. We will inspect it, identify the cause, and put the fix in writing.
Solar Repairs · 15 Delawney Street, Balcatta WA 6021 · 1300 555 274 · Electrical Licence EC8323 · Plumbing Licence PL6817
